Type 50 brake vacuum servo assembly for early Defender. Identified by a 227 mm overall diameter with the vacuum non-return valve located at the bottom right of center. The stud mounting pattern for the servo to brake pedal assembly is 5 5/8" x 3 1/2" from center to center.
Fits: Defender with non-ABS braking system 1983-1990. See note below.
NOTE: Alternative brake servo assembly for early Defender used during this period is Type 80. This measures 276 mm overall diameter with the vacuum non return valve located at top left of center. For Type 80 brake servo assembly use PLD293
Additional Images:
Fits These Vehicles:
| Model: | Notes: |
|---|
| Defender 90 | 1984 - 1990 |
| Defender 110 | 1983 - 1990 |
| Defender 130 | 1985 - 1990 |