 |
| 2IN LIFT SPACER FOR COIL SPRING SUSPENSION (SET OF 4) |
Raise your coil sprung vehicle by 2 inches, using our Lift Spacers. Easy to install, for that DIY person. No special tools are required. Fits between axle and spring plate. Set of 4 (2 front and 2 rear). Does not fit Discovery II's.
Fits:
Range Rover Classic
Defender 90/110
Discovery I
|
| |
| Part#:RNA5102 |
| Price: $99.95 |
| |
|
|
|
|
 |
| BILSTEIN STEERING DAMPER |
| Bilstein steering stabilizers help steering control under all kinds
of driving conditions by reducing steering shimmy and driver fatigue.
They can also help reduce tire wear and protect front-end components
from premature failure.
Bilstein steering stabilizers are built with the same quality and endurance as their Heavy Duty shock absorbers.
Includes all hardware & bushings for mounting, Bilstein.
Fits:
Range Rover Classic
Discovery I
Series 88" & 109"
|
| |
| Part#:RNA245 |
| Price: $79.95 |
| |
|
|
|
|
 |
| CASTOR KIT POST 86 RRC, DI & 90/110 |
Caster Correction Bushes. An inexpensive way to restore positive caster angle to a vehicle lift with 2-3 inches. Set of 4.
|
| |
| Part#:CALR2 |
| Price: $129.95 |
| |
|
|
|
|
 |
| COIL SPRING SET - GENUINE DISCOVERY HEAVY DUTY |
 These springs have been engineered by Land Rover for expedition and off-road use, and are field-proven after years of use in our own vehicles. These Genuine Heavy Duty springs will work well with either Bilstein, Pro Comp or OME shock absorbers, depending on your vehicle’s laden weight. Kit includes 2 front springs and 2 rear springs.
Fits:
Discovery I
 (a heavy weight charge will be added at check out)
|
| |
| Part#:RNK5103 |
| Price: $331.75 |
| |
|
|
|
|
 |
| COIL SPRING SET - GENUINE DISCOVERY I EXTRA HEAVY DUTY |
| Upgrade To Genuine Land Rover Heavy Duty Springs For Expedition Quality, Maximum Control and Comfort. For Land Rover owners who insist on Genuine parts, these Heavy Duty Springs are the answer. These springs have been engineered by Land Rover for expedition and off-road use, and are field-proven after years of use in our own vehicles. These Genuine Heavy Duty springs will work well with either Bilstein or OME shock absorbers, depending on your vehicle’s laden weight. Kit includes 2 front springs and 2 rear springs.
Fits:
Discovery I
(a heavy weight charge will be added at check out)
|
| |
| Part#:RNK5113 |
| Price: $340.73 |
| |
|
|
|
|
 |
| DISLOCATION CONE FRONT PAIR |
Front dislocation cones for coil sprung vehicles. Easily bolts to your chassis front top spring mount. Proven effective in guiding a dislocated spring back into place, allowing for maximum axle articulation. (sold in pairs). Requires spring retainers (see part # SRP105).
Fits:
Defender
Discovery I
Range Rover Classic
|
| |
| Part#:PLS023DC |
| Price: $89.00 |
| |
|
|
|
|
 |
| HEAVY DUTY SHOCK TOWER FRONT PAIR GALVANIZED |
Heavy duty shock towers for coil sprung vehicles. Standard 10” height, galvanized. (sold in pairs) Note: Heavy duty shock towers require 2 heavy duty securing rings, #PLS039HD.
DISCONTINUED PLEASE USE RNA504
Fits:
Defender 90/110
Range Rover Classic
Discovery I |
| |
| Part#:PLS023HDG |
|
| |
| |
|
|
|
 |
| OLD MAN EMU - STEERING DAMPER |
For Land Rover owners who require heavy-duty shocks, off-road performance and maximum load capacity. Twin-tube design offers unsurpassed protection against rocks and debris. These heavy duty nitrogen-gas shock absorbers are recommended for applications where more dampening is needed for use with oversize tires.
Fits:
Range Rover Classic
Discovery I
Series 88" & 109"
|
| |
| Part#:OMESD11 |
| Price: $89.00 |
| |
|
|
|
|
 |
| POLY AXLE STOP - FRONT/REAR |
2 1/4 inch orange Poly Axle Stop, for front or rear, to limit downward axle travel.
Fits:
Defender 90/110
Range Rover Classic
Discovery I
|
| |
| Part#:PLH057 |
| Price: $24.95 |
| |
|
|
|
|
 |
| POLY AXLE STOP - FRONT/REAR EXTENDED |
3 1/2 inch raised orange Poly Axle Stop, for front or rear. Prevents bottoming out damage to your shock absorbers on vehicles lifted greater than 2 inches.
Fits:
Defender 90/110
Range Rover Classic
Discovery I
|
| |
| Part#:PLH057E |
| Price: $29.95 |
| |
|
|
|
|
 |
| POLY BUSHING SET R/R, DEFENDER 90 & DISCOVERY I |
Polyurethane bushing kit. An easy to install, economical alternative to Genuine Bushings. Superior quality formulated for medium firmness to provide the best mix of handling and comfort for Land Rovers used both on and off-road. Kit includes all suspension and shock absorber bushings for your vehicle.
Fits:
Discovery I
Range Rover Classic (except 1995)
Defender 90 1994 on
|
| |
| Part#:PBS1115 |
| Price: $179.00 |
| |
|
|
|
|
 |
| SPRING RETAINER - FRONT PAIR HEAVY DUTY |
Spring retainers for coil sprung vehicles. Improves springs attachment to axle. Required with dislocation cones (sold in pairs).
Fits:
Defender
Discovery I
Range Rover Classic
|
| |
| Part#:SRP105 |
| Price: $19.50 |
| |
|
|
|
|
 |
| SPRING RETAINER - REAR PR HEAVY DUTY |
Spring retainers for coil sprung vehicles. Improves springs attachment to axle. Required with dislocation cones. (sold in pairs)
Fits:
Defender 90
Range Rover Classic
Discovery I
|
| |
| Part#:SRP106 |
| Price: $15.80 |
| |
|
|
|
|
 |
| SUSPENSION BUSH KIT - FRONT DISCOVERY |
Genuine Land Rover Front Suspension Bushing kit.
For superior
performance and durability, no other bushings outlast Genuine
suspension bushings. Kit includes: Genuine Land Rover bushings and
hardware for replacing suspension bushings on coil sprung vehicles.
Professional installation is recommended.
Fits:
Discovery I
|
| |
| Part#:RNK5918 |
| Price: $185.00 |
| |
|
|
|
|
 |
| TERRAFIRMA 3 DEGREES FRONT RADIUS ARMS |
Realigns caster angle for correct front axle steering and handling geometry. Designed for 3-4 inch suspension lifts. Sold as pairs.
Fits:
Defender
Range Rover Classic
Discovery I
(heavy weight charge will be added at check out)
|
| |
| Part#:TF508 |
| Price: $499.95 |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
MILITARY LAND ROVER SALES
Join Our Email List