Rovers North

Looking to protect your pride and joy, but aren't near a Waxoyl application center? Waxoyl DIY aerosol kits contain everything you need to get the job done without specialty tools or an air compressor. All you will need is a way to get under the vehicle (ramps or jack stands for low vehicles), a few hours of your time, and a desire to save your vehicle from corrosion.

This all-inclusive do-it-yourself aerosol kit is sized for Series 88, Defender 90, Range Rover Classic, and Discovery and contains:

9x Waxoyl Hardwax Plus for underbody protection

• Hardwax kills existing surface rust!
• The unique capillary action of Waxoyl Hardwax displaces moisture to achieve an optimum bond, even in damp environments. Waxoyl adheres equally well to wet or dry metal!
• Insulates against temperature changes and provides sound-proofing for a quieter ride.
• Temperature range of active protection from -30F to 302F.
• Very resistant to aging. Contains no mineral acids, bases, lead, chromium, or zinc.
• Safe on all paint finishes. Contains no silicone or fluorocarbon.
• Protects for the life of the vehicle with occasional touch ups.

3x Waxoyl Power Shield for cavity protection

• Applies clear for invisible protection.
• Where surface rust already exists, Waxoyl Power Shield stops further corrosion.
• "Fogs" the cavities to prove total coverage from the inside out.
• Penetrates deep into seams, providing protection where it is needed most.
• Application tool snakes through existing drains for complete protection without drilling access holes.
• Displaces moisture to achieve an optimum bond, even in damp environments. Can be applied to wet surfaces.
• A little goes a long way! Optimal protection with only .04 to .05 mm dry film thickness.
• Temperature range of active protection from -40F to 300F.
• Safe on all paint finishes. Contains no silicones or fluorocarbons.
• Protects for the life of the vehicle with occasional touch ups.

Safety Equipment

• Particulate mask
• Safety glasses
• Gloves