Coil sprung chassis for Series 88.
Maer have designed a coil sprung chassis to take on the suspension, axles, steering box, gearbox, and transfer box of a Discovery 1. This offers an easier pathway to modernizing your Series than any full custom swap would otherwise be. Each build would still be a completely custom swap, but this chassis would allow a Series owner to modernize the brakes and drivetrain in a more straightforward manner. It comes with bare metal plates to weld on engine brackets. Keep in mind that customization and fabrication will be required for any swap project.
All Maer chassis are laser cut and shaped with a CNC. Legs are welded using 3mm thick steel. Outriggers and crossmembers are made with material ranging from 3mm to 8mm thick depending on the strength that is needed. Parts of the chassis that require extra strength will use thicker steel. Inspection holes and drains are added so the chassis can be washed easily on the inside. Bolted gearbox crossmember.
All Maer chassis are designed from the ground up using modern scans of an original chassis to ensure accuracy. Improvements are made using modern manufacturing practices where applicable.
Fits These Vehicles:
| Model: | Notes: |
|---|
| Series II | 88 |
| Series IIA | 88 |
| Series III | 88 |