DISCONTINUED - NOT RETURNABLE - ONLY 1 Right Hand Seat Available - Left Hand and Center Seats NOT Available in this trim
Introducing the Premium High back seats for the rear passengers in 109, 110 & 110 crew cab Land Rovers fitting all Series II & III also all Defender including the new Puma TDCi.
FEATURES
One of the key features of these seats is the adaptations in use - you can safely install just 2 outer seats only and allow access through the centre to the rear seats or simply just install one. With only 2 seats installed you cab fit a centre storage box or leave a gap for rear access. All of these seats are available as either left-hand outer, centre & right-hand outer.
The seats are supportive and extremely comfortable for long journeys with increased legroom and good head height. Ability to fold the seatbacks down flat against the base for extra space when loading larger items (you may need to remove the headrests depending on your front seat position).
- Tested to meet all regulation standards
- Child seat SAFE - specifically developed to hold a child restrain in place and the seatbacks are individually reclining
- Extra leg room
- Rear storage pockets
- Individual Seat back adjustment
- Adjustable twin stalk removable headrest
- Fold-down seatbacks
- Configuration options
- Easy to install
These new style high back seats come with all the hardware you need to install - easy to fit with all the underbody mounting plates once the old seats are removed. The seats utilize the existing second-row seat belt configuration so there is no need to adapt your belts unless you are upgrading a puma defender then-new stalks and center belt will be required.
FITS:
109, 110 & 110 crew cab Land Rovers - all Series II & III also all Defender including the new Puma TDCi.
NOTE: Series or Defender install with 3 MAN bench seat factory fitted - please note you may need to remove and install a 2 MAN bench seat as the 3 man bench can restrict the fitting.
NOTE: Puma TDCi from 2007 onwards install - your centre seat belt and outer buckles are part of your seats. You will be required to install a centre second-row belt and a pair of floor-mounted buckles.
The outer inertia 3 point belts remain in place so there is no need to change these at all.
If you have a Puma vehicle you may find when fitting, the frames do not meet the arch on the back as per the image below. If this is the case please contact us to provide a solution from Exmoor's fitting department.
Fits These Vehicles:
Model: | Notes: |
---|
Defender 110 | |
Defender 130 | |
Series II | 109 |
Series IIA | 109 |
Series III | 109 |